The 9H42x-xx Module View
2-26 Managing the Module
2. Enter the new time in a 24-hour hh:mm:ss format, either by highlighting the
field you wish to change and using the up and down arrow buttons, or by
simply entering the new value in the appropriate field.
3. Click on to save the changes, or on to exit without changes.
To edit the device date:
1. Click on Device on the Module View window menu bar to access the Device
menu, drag down to Edit Device Date..., and release. The following change
window, Figure 2-11, will appear.
Figure 2-11. Edit Date Window
2. Enter the new date in a mm/dd/yy format, either by highlighting the field you
wish to change and using the up and down arrow buttons, or by simply
entering the new value in the appropriate field.
3. Click on to save the changes, or on to exit without changes.
Enabling and Disabling Ports
When you disable bridging at a port interface, you disconnect that port’s network
from the bridge entirely. The port does not forward any packets, nor does it
participate in Spanning Tree operations. Nodes connected to the network can still
communicate with each other, but they can’t communicate with the bridge or
with other networks connected to the bridge. When you enable bridging for the
interface, the port moves from the Disabled state through the Listening and
Learning states to the Forwarding state; bridge port state color codes will change
accordingly.
!
CAUTION
Before disabling bridging for any port, be sure that doing so will not sever your network
connection.