Managing the Module 2-27
The 9H42x-xx Module View
To enable or disable bridging for an individual interface:
1. Click on the appropriate port display box to display the port menu.
2. Drag down to select Enable to enable bridging at the interface, or Disable to
disable bridging. Bridging will now be enabled or disabled across the selected
port, as desired.
To enable or disable bridging for all interfaces on the selected module:
1. Click on the Bridge label to display the Bridge menu.
2. Drag down to select Enable Bridge to enable bridging at all interfaces, or
Disable Bridge to disable bridging across all interfaces. Bridging will now be
enabled or disabled across the installed interfaces, as desired.
NOTE
For more information about bridging functions and how to determine the current state of
each bridge port, see Chapter 5, Bridging.