Cabletron Systems 9T122-08 appendix If the port is If the port is a

9T122-08 Module Specific Information

Table 4. Token Ring Port Operational Codes

	And if the port is
If the port is a...	administratively	Then, the operational status is:
	turned...
Ring Port		ACT (Active)
RI (ring-in) or		The port is on and is passing data to the ring.
RO (ring-out)	ON	WRP (Wrapped)
		The port is on, but it is autowrapped, either because of a
		cable failure or because the cable is not connected.
	OFF	DIS (Disabled)
		The port is off (wrapped by Management).
Lobe Port		INS (Inserted - phantom link is detected)
	ON	The lobe port is inserted into the ring.
		ENB (Enabled - no phantom link is present)
		The lobe port is not inserted into the ring.
		LNK (Linked - phantom link is detected)
		The lobe port is trying to gain access to the ring, but it has
	OFF	been prevented.
		BYP (Bypassed -no phantom link is present)
		The lobe port is not attempting to gain access to the ring.
		FLT (Speed Fault)
	ON or OFF	The ring speed of the port is in conßict with the ring speed
		of the designated token ring. The port will remain
		wrapped.

Exiting the Token Ring Port Configuration Screen

To exit the Token Ring Port ConÞguration Screen, use the arrow keys to highlight RETURN, then press the Return key.

20