General Configuration Screen
The General ConÞguration Screen (Figure 1), displays various information about the selected module and allows you to set the following general parameters:
¥ | Date and Time |
|
|
¥ | Screen Update Time |
|
|
¥ | Screen Lockout Time |
|
|
¥ | Host IP Address |
|
|
¥ | Subnet Mask |
|
|
¥ | Default Gateway |
|
|
¥ | Default Interface |
|
|
¥ | TFTP Gateway IP Address |
|
|
|
|
|
|
| SmartSwitch 9000 | LOCAL MANAGEMENT |
|
| General Configuration |
| |
| Module Name: | Firmware Revision: 01.08.07 | |
| Slot Number: 2 | BOOTPROM Revision: 01.01.09 | |
| Module Serial #: 04 | Module Date: | 05/24/1996 |
| Module Board Revision: 04 | Module Time: | 09:18:13 |
|
| Screen Refresh Time: 03 sec | |
|
| Screen Lockout Time: 15 min | |
| FLASH Memory: 2 MB |
|
|
|
| Host IP Address: | XXX.XXX.XXX.XXX |
|
| Subnet Mask: | 255.255.0.0 |
|
| Default Gateway: | NONE DEFINED |
|
| Default Interface: | NONE DEFINED |
|
| Base MAC Address: | |
|
| TFTP Gateway IP: | 0.0.0.0 |
| SAVE |
| RETURN |
|
|
|
|
Figure 1. General Configuration Screen
3
