Cabletron Systems 9T122-08 appendix Token Ring Bridge Configuration Screen, None

9T122-08 Module Specific Information

Token Ring Bridge Configuration (Screen 1)

The 9T122-08 Token Ring Bridge ConÞguration Screen 1 (Figure 2), provides basic setup options for making a bridge operational in your network.

	SmartSwitch 9000		LOCAL MANAGEMENT
	Bridge Configuration
Module Name: 9T122-08			Firmware Revision: 01.08.07
Slot Number: 2			BOOTPROM Revision: 01.01.09
Bridge Address: 00-00-1D-01-03-04			Bridging Interfaces: 3
Bridge Number	(hex):	1	Type of STA:	[IEEE]
Bridge Priority Label (hex):		8000	Novell Xlat:	[NONE]
Bridge Path Cost	(hex): 0000000A

Interface #		MAC/Local Address	Bridge State	Status
1	(FNB)	00-00-B8-80-C0-A0	forwarding	[ENABLED]
2	(TR1)	00-00-B8-80-C0-60	forwarding	[ENABLED]
3	(TR2)	00-00-B8-80-C0-E0	forwarding	[ENABLED]
SAVE		INTERFACE CONFIGURATION		RETURN

Figure 2. 9T122-08 Token Ring Bridge Configuration Screen 1

NOTE

To modify a non-toggle Þeld on this screen, use the arrow keys to highlight the Þeld, then press the Enter key. Now you can modify the Þeld.

7