Cadco OV-023, OV-013, OV-003 Control Panel, Time Dial, Temperature Dial, Cleaning Your New Oven

Models: OV-023 OV-003 OV-013

1 13
Download 13 pages 10.34 Kb
Page 5
Image 5
3. CONTROL PANEL

3. CONTROL PANEL

INDENTATIONS

 

TIME

 

 

TEMPERATURE

GREEN LED LIGHT

RED LED LIGHT

3.1 TIME DIAL

To operate your oven for a set time, you must first turn the time dial clockwise to the time you choose, from 0 to 60 minutes (if you’re facing the oven, it is the dial on the left side of the control panel). Line up your desired time (on the dial) with the indentation in the control panel above the time dial.

When set cooking time is over, the dial turns to “0” position, the oven turns off, and the green LED light goes out.

To operate the oven continuously instead of for a set time, turn the time dial counterclockwise until the hand icon ( 3.1 TIME DIAL ) on the dial lines up with the indentation in the control panel above the time dial. The oven will operate continuously until you manually turn the dial back to “0”.

Whether you have chosen to set an actual time, or have set the time dial for continuous “on”, the fan will begin spinning, and the green LED will turn on.

3.2 TEMPERATURE DIAL

The temperature inside the cooking chamber is set by the temperature dial (if you’re facing the oven, it is the dial on the right side of the control panel).

Turn the dial clockwise and set your desired temperature. Line up your desired temperature (on the dial) with the indentation in the control panel above the temperature dial. At this time the red LED located just to the left of the temperature dial will turn on. This indicates that the heating element is on; when the set temperature is reached, the red LED turns off.

Please note: the red LED light will alternate on and off throughout the cooking cycle. This indicates that the heating element is turning on and off to help keep the actual temperature within 5-10 degrees of the set temperature.

Always preheat oven before placing food into it.

5. CLEANING YOUR NEW OVEN

WARNING: Before starting any maintenance or cleaning operation, it is necessary to disconnect the electrical power supply and wait for your oven to cool down.

5.1BEFORE USING YOUR NEW OVEN

Clean the metal parts with hot soapy water and rinse thoroughly.

With cooking cavity empty, heat the oven for about 30 minutes at a temperature of 350°F to “burn it in”.

Never wash the cooking chamber with acids, abrasives, or aggressive detergents.

The oven should never be cleaned with direct water from a hose. Never use anything more powerful than a spritz bottle to clean your oven, to avoid damaging the electrical components and voiding your warranty.

5.2CLEANING THE COOKING CAVITY

Make sure to wipe up any and all spills as they occur.

At the end of the day (or as needed), clean the cavity using only proper products.

Never clean the stainless steel with acids, caustic detergents, abrasives or any products containing chlorine.

The appliance should never be cleaned with direct water from a hose. Never use anything more powerful than a spritz bottle to clean your oven, to avoid damaging the electrical components and voiding your warranty.

5

Page 5
Image 5
Cadco OV-023, OV-013, OV-003 Control Panel, Time Dial, Temperature Dial, Always preheat oven before placing food into it