Cleaning the air conditioner
Cleaning the Zero filter
Zero filter traps small dust particles within the air. It is washable and it can be used
Remove the lower Full HD filter. Grasp the handle on the Zero filter and remove it by pulling it in the direction of the arrow shown in the figure.
Soak the filter in the water and shake it up and down for few times.
▶Do not disassemble the Zero filter when cleaning it.
▶If the accumulated dust is heavy, soak the filter in water mixed with detergent and shake it in water for 30 minutes until it is cleaned.
Push the Zero filter in the direction of the arrow and make sure it is fixed in correct position. Put the lower Full HD filter back.
Dry the filter in a ventilated area.
▶Put the filters vertically for 12~24 hours when drying (Drying time can be shorter depending on the condition)
▶Do not dry the Zero filter in direct sunlight. It may get deformed.
CAUTION
• Be careful with the sharp rear surface of the Zero filter. You may cut in your hands.
• Clean the Zero filter every 3 months. (Based on 8 hours of use per day.) Cleaning term may differ depending on
NOTE the usage and environmental conditions.
