Checking the remote controller
Function may be different depending on the model.
▶▶ Point the remote controller towards the remote control receiver of the unit.
▶▶ When the button is pressed, you will hear ringing or beep sound and Transmit indicator ( ) will appear on the remote controller display.
Remote controller buttons
Remote controller display 
Power
Turn on/off the air conditioner
Purity
Select Zero filter and Virus doctor
Smart Sensor 
Select Smart sensor mode
WPS
Temp + -
Increase/Decrease the temperature by 1 ˚C
good'sleep
Set the good'sleep mode on
Auto Clean | Lighting |
Activate auto clean function to dry inside | |
of the indoor unit (to get rid of odor) |
|
Mode
Select one of the 5 operation modes
Turbo
Operate in maximum fan speed to cool/ warm quickly
Solo/Family
Select Solo/Family mode
Air Flow
Set the air flow to cool effectively according to the surrounding
Fan
Adjust how much air flows through the air conditioner with the 4 different fan speeds
Quiet
Reduced noise is generated during operation
Beep Off
To silence the beep sound when pressing the button
Lighting
Set lighting of indoor unit
On Timer
Set the On timer on
[2ndF] button
Set/Cancel
Set/Cancel the timer/good'sleep mode
Off Timer
Set the Off timer on
Select the function underneath a button
02 BASIC FUNCTION
|
|
| • | 2ndF button: When pressing the 2ndF button, | will appear on the remote controller display and you can select | |
|
|
| ||||
|
|
| ||||
NOTE | the below function of a button.(e.g. When pressing | ▷ Lighting , you can select the Lighting function.) If you | ||||
|
|
|
| press the 2ndF, Power, Purity and the Set/Cancel button or don't press any buttons for 10seconds, the display will | ||
disappear and you can select the function of the button.
