Problem: Misalignment of Igniter on Burner
Solution: • Check for proper position of the electrode tip, which should be pointing forward towards the front of the burner and free of grease to allow proper sparking.
•The ignition wire should be connected firmly to the valve ignition device and electrode. Replace the ig- nition wire if it is frayed or cracked.
•With the gas supply closed and all control knobs set to the off position, check each position igniter indi- vidually for the presence of a spark at the electrode. Push each knob in fully and rotate it about 1/4 turn to the left
•While the grill is still hot, wait for a minimum of five minutes before commencing
/ corrections have been made and the gas grill still fails to operate properly, contact your local Cal Flame dealer.
Problem: Flashback
Solution: When fire occurs in and around the burner tubes, im- mediately turn off gas at its source and turn the con- trol knobs clockwise to the ‘OFF’ position. Wait until the grill has cooled off and then clean the burner tubes and burners as described on page of this manual.
Replacement Cover
We recommend covering your pizza oven to protect it from the ele- ments. You may order a cover for your pizza oven through your dealer or by calling
19 Appendix
2009 Pizza Cart
LTR20091039, Rev. A | www.calspas.com |