Filling and Powering Up Your Portable Spa

Never fill your spa with soft water.

Soft water makes it impossible to maintain the proper water chemistry and may cause the water to foam, which will ultimately harm the finish of the spa and void your warranty.

9 Preparingfor

1.Once the spa has been placed on an approved surface and has been correctly wired by a licensed electrician, inspect all plumbing connections in the equipment area of your spa. Ensure that these connections are secure and that they did not loosen during shipment.

2.If equipped, open all gate valves in the equipment area. Before operating the spa, these valves must be in the up or “open” position.

VERY IMPORTANT!

Never run the spa with the gate valves closed or without water circulating for long periods of time. Be careful not to over-tighten the plumbing fittings.

3.Remove the cartridge from filter canister.

4.Place a garden hose in the filter canister and fill your spa with regular tap water about six inches from the top.

VERY IMPORTANT!

Always fill the spa through the filter canister! Failure to do so may cause air to be trapped in the filtration system and prevent the pumps from operating properly.

5.Presoak the filters in spa water.

VERY IMPORTANT!

You must presoak the filters before inserting them in the filter canister. Dry filters can allow air into the filtration system which can cause pump failure.

6.(For owners of the automatic bromine generator) Make sure the dial on the face of the bromine generator unit is turned to the OFF position.

7.Once the water is at the correct level and air is bled, turn on the power at the GFCI breaker. (Ensure that the 120V spas are connected to the proper electrical outlet.)

Note: Depending on the model, when the power is turned on to the spa, the controls will perform a diagnostic check for approximately five minutes.

When the diagnostic is complete, the spa will automatically operate at filter speed and continue heating until the spa water temperature reaches the default temperature of 100˚F.

8.If no water is flowing when the pump is running, there could be an air pocket at the suction side of the pump. Shut off power to the spa and loosen the pump union on the suction side of the pump to bleed the air. When air is bled, turn power back on.

9.Install the pre-soaked filters into the filter canister.

The spa is now ready for use.

Your New Portable Spa

2009 Portable Spa

LTR20091000, Rev. A

www.calspas.com

Page 10 Page 12
Page 11
Image 11
Cal Flame manual Filling and Powering Up Your Portable Spa, Never fill your spa with soft water
Page 10 Page 12

Portable Spa specifications

The Cal Flame Portable Spa is a remarkable addition to outdoor relaxation, combining innovation and comfort in a sleek design. This portable hot tub provides users with the luxury of a spa experience right in their own backyard or on the go. One of the standout features of the Cal Flame Portable Spa is its easy setup and compact design, allowing for straightforward installation and mobility. Made with durable materials, these spas are built to withstand various weather conditions, ensuring longevity and reliability.

One of the key characteristics of the Cal Flame Portable Spa is its seating capacity. Designed to accommodate multiple users, many models can comfortably fit between four to six people, making it perfect for family gatherings or social events. The ergonomic seats provide optimal support, allowing users to unwind and relax in comfort, enhancing the overall experience.

Heating technology is another highlight of this portable spa. Equipped with a powerful heating system, users can easily adjust the water temperature to their liking, offering a customizable experience. The energy-efficient heater ensures that your spa is warm and ready for use while also keeping utility costs low.

The hydromassage jets in the Cal Flame Portable Spa play a pivotal role in creating a soothing atmosphere. Strategically positioned, these jets deliver a targeted massage experience, relieving stress and tension in muscles. Users can also control the intensity and direction of the jets, tailoring their spa experience to individual preferences.

In addition to comfort and relaxation, safety features are paramount in the Cal Flame Portable Spa. It comes with a secure cover, reducing heat loss and preventing unauthorized access when not in use. The spa's design also incorporates slip-resistant surfaces to minimize the risk of accidents.

Lastly, the aesthetic appeal of the Cal Flame Portable Spa cannot be overlooked. With a variety of colors and finishes available, users can choose a design that complements their outdoor décor. The combination of function and style makes the Cal Flame Portable Spa an attractive feature in any outdoor space, promoting relaxation and leisure for years to come. Overall, this portable spa delivers an exceptional hydrotherapy experience, perfect for enhancing your outdoor lifestyle.
Top Page Image Contents