Cal Flame Portable Spa Programming the Universal Remote Control, Using the iPod Docking Station

36

theUsing SystemEntertainment

NOTE: The only DVD functions available with the universal remote control are shown above..

You will have to use the function but- tons on the DVD player to navigate DVD menus on the TV screen.

Programming the Universal Remote Control

The Cal Spas universal remote has been pre-pro- grammed to function with the entertainment sys- tem the spa has been configured with. However, in case you need to reprogram the remote, use the device list below for the programming code.

1.Turn on the device (TV, CD player, DVD player) with the manufacturer’s remote control.

2.Press the button on the remote for the device you want to program (TV, CD, DVD, etc.)

3.Press and hold the SETUP button until the LED blinks twice.

4.Enter the device code. If you perform this procedure correctly, the LED will blink twice. If not, repeat steps 2 and 3.

Device Manufacturer	Device	Code
	Type
Samsung 42” plasma	TV	1312
River Park 20”	TV	1530
Aeware	DVD	1866
Sony CDX-GT10M	CD
Sony CDX-HS70MW	CD

Using the iPod

Docking Station

To play an iPod from the docking station to the spa’s stereo system:

1.Place the iPod in the docking station.

2.Press the

SOURCE button on the stereo (if equipped) un- til the display shows AUX.

3.Play the iPod.

4.Adjust volume using the vol- ume control in the docking station.

2009 Portable Spa

www.calspas.com LTR20091000, Rev. A