Remote control
The 550T is supplied with a system remote control that operates both this tuner and Cambridge Azur amplifiers.
Power
Switches the 550T between On and Standby mode. The blue LED on the front panel of the 550T indicates that it is On when bright and in Standby mode when dim.
These allow access to any stored presets you might have saved in the 550T.
10 + key | Store | FM/AM |
Allows access to preset stations
Store | Vol |
|
| azur | 550T |
Technical specifications | ENGLISH | |
Frequency Range | FM | |
| FM |
|
| AM |
|
| AM |
|
Aerial Inputs | 75 ohms unbalanced (FM) |
|
| 50 ohms unbalanced (AM) |
|
FM Sensitivity |
| |
Signal to Noise | 50dB typical (FM) |
|
| 47dB typical (AM) |
|
FM Frequency Response (±3dB) 20Hz - 15KHz
Distortion
Stereo Separation @ 1KHz
Maximum Power Consumption
Standby Power Consumption
Dimensions – H x W x D
To store a preset with the remote press Store
then use the buttons to select the desired preset location. Press store again to
Mode
Weight
confirm.Vol
FM/AM
This button switches between the FM and AM bands that the 550T is capable of receiving.
For use with Tuning, Alarm and Clock settings.
Mode
Toggles between Scan and Preset modes, thereby changing the functionality of the
buttons.
Clock
This button is used to access the Alarm menu as discussed in the Operation Instructions section of this manual.
(Info)
i
MP3 | CD | Tuner | |
DAB | |||
|
| ||
DVD | Aux | Tape | |
Mon | |||
|
|
Troubleshooting
There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
The aerials are incorrectly connected.
The sound is distorted or garbled
Check aerial connections and placements.
There is a hum coming from the speaker
Switches between the Display modes described in the Front Panel Controls section. The RDS information on the FM band is dependant on the strength of the signal.
Bright
Alters the brightness of the display backlight. There are three levels of brightness: Bright, Normal, and Off.
Please note that the following buttons will only operate a matching Cambridge Audio azur amplifier:
Volume
Volume buttons to increase or decrease the Volume of the amplifier output.
Source select
The five Source Select buttons and the Tape Monitor Select button are used to change the input source (CD, DVD etc).
Mute
This button mutes the audio on the amplifier. The Mute mode is indicated by the channel LED flashing.
Ensure that all cable connections are secure.
There is unwanted background noise and interference
Move the tuner away from other electrical equipment that is likely to cause interference.
The remote handset will not function
Check that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
7