OPERATING INSTRUCTIONS
Tuning and listening to the 640T
Press the Standby/On button on the front panel.
For DAB stations, select DAB mode using the DAB/FM button.
Press the Autotune button. The 640T will search for all available DAB stations and display them in alphabetical order on the display.
Press the Step buttons to scroll through the list.
Press the Select button to listen to your chosen station. For FM stations, select FM mode using the DAB/FM button.
Press the Autotune button. The 640T will scan up through the FM band and play the first station found (RDS may accompany a strong signal). Press the Autotune button again to scan up to the next available station (to scan down the FM band press and hold the Autotune button).
DAB Manual fine tune
Hold the select button down until ‘Manual Tune’ appears on the display. Frequency and name of the particular station will be displayed.
Use the Step buttons to adjust the frequency Press Select again until DAB is displayed.
Setting Presets
Select the station you wish to store and hold down the desired preset number (e.g 3) until the display shows that the station has been stored. To store the presets
Press chosen Preset button at any time to listen to the corresponding station
DAB System Reset
If the 640T is moved to another location where there are different stations then the old stations should be removed from the memory.
To do a system reset unplug the 640T then hold down the Select button whilst plugging back in.
Continue holding Select until "System Reset" appears on the display.
8azur DAB/FM tuner
Clock /Alarm/ Sleep functions
When the unit is tuned into an RDS broadcast, the clock time will be set automatically.
If you cannot receive RDS FM transmissions, you can set the clock manually.
Setting the Clock manually:
With the unit turned on hold the Alarm button on the remote control down until the display reads ‘Set Time: Manual’, then press Select.
By immediately using either of the Step (< >) buttons, the time may then be altered (after four seconds of inactivity the screen changes back to the normal idle screen i.e out of Manual clock mode).
The Alarm function will turn on the 640T at a chosen time:
Press Alarm on your remote handset. ‘Alarm’ and ‘Off’ will appear. Press Select. ‘00:00’ will appear.
Press the (< >) keys to alter the time (‘Alarm Setting’ will be displayed). Press Select again to set (press twice to turn off Alarm function).
An asterisk will appear on the LED display to indicate if the alarm has been set, when the 640T is in Standby mode.
The Sleep function will turn the 640T off after a set period:
Press the Alarm button twice when the unit is on. Select number of minutes required (01 - 99). Press Select again to activate.
NB: It is necessary to reset the Sleep function before each use.
Natural Contour Technology
Experiment with the three available settings (switch on rear panel) to achieve the optimum tone from your 640T.
