Phase, Incoming Sample Rate | Cambridge Audio azur DacMagic instruction

azur DacMagic

4Phase

Indicates the output phase selected. Press and hold the Filter/Phase select button for approximately two seconds to select normal or inverted phase output. When the LED lights up, the phase is inverted by the DacMagic.

If you suspect that your source material or amplifier, etc., is inverting the phase of the musical signal, you can use this function to re-invert the audio and regain absolute positive phase.

5Incoming Sample Rate

In the presence of an incoming digital stream, the relevant LED will light up to indicate the incoming digital sampling frequency (between 32kHz and 96kHz LPCM).

ENGLISH

11

Image 11

Cambridge Audio azur DacMagic user manual Phase, Incoming Sample Rate

Contents

Azur DacMagic Contents Introduction Important safety instructions CE mark FCC regulations Power sources Digital Outputs Rear panel connectionsUnbalanced Audio Outputs Balanced Audio Outputs USB AC 12V 1.5A Power Adaptor SocketImportant Note Use the supplied power supply unit only Digital Inputs 1 Source Power On/OffFilter/Phase Select Front panel controls Incoming Sample Rate Phase Audio output connections Digital audio input connections AC adaptor Azur DacMagic Digital audio output connections Operating instructions Filters Linear Phase Filter Impulse response Amplitude Minimum Phase Filter Azur DacMagic Steep Filter Azur DacMagic Page Technical specifications Low hum or buzzing sound can be heard TroubleshootingThere is no power There is no sound Limited warranty AP23905/1-A