Cambridge Audio iD50 user manual Remote control

iD50

Remote control

Backlight

Turns the iPod backlight on for about 10 seconds.

Standby/Mode

Pressing this button both brings the dock in and out of Standby and selects the iD50’s Simple or Advanced modes for controlling the iPod.

In Standby mode there will be a dim blue

LED visible through the front IR window.

Pressing the button when the dock is in Standby wakes up the iPod and dock (in the mode it was last in). The blue LED visible through the front IR window turns on more brightly.

Pressing the button again will then toggle the dock back and forth between Simple and Advanced modes.

In Simple Mode the iPod is controllable either by remote control or its own front panel and touch wheel. The iPod’s own display is active and can be used to view and select content, etc.

In Advanced Mode, the iPod is instead fully controlled and browsed via the iD50’s On-Screen Display (OSD) on a suitable TV. The iPod’s own display, front panel and touch wheel are not used. A Cambridge Audio logo and “Ready to Disconnect” appears on the iPod’s display and the iD50’s OSD becomes

active via the video outputs. The blue LED visible through the front IR window is also on brightly in this mode.

Note: the iD50 will take a few seconds to intialise the iPod when entering this mode.

In either mode, to put the iD50 and iPod into Standby simply press and hold the button on the remote or the Play/Pause key on the iPod itself for about three seconds.

Menu

Press to go back to the previous menu. Hold down to return to the Home menu (Advanced Mode only).

Navigate

Navigates up/down through the menus.

Skip

Press to select previous or next song. Hold down to fast-forward or rewind songs.

Select

Press to select a menu item.

Repeat

Press to cycle through the repeat modes in Simple Mode. In Advanced Mode, the settings menu will be shown on the OSD showing the current status of this function. Press the button again to select a new repeat function.

Play/Pause

Press to play or pause video or audio playback.

Shuffle

Press to select song shuffle in Simple Mode. In Advanced Mode, the settings menu will be shown on the OSD showing the current status of this function. Press the button again to select a new shuffle function.

Album

Simple Mode: Press to select previous or next album.

Advanced Mode: Press to view the previous or next page of the menu (for speedier navigation).

Playlist

Simple Mode only: Press to skip to the next playlist on the iPod (if you have created playlists).

Note: The iD50 is also compatible with Apple’s own iPod remote and some Cambridge Audio Azur Navigator remote controls supplied with our products. Currently almost all of the remotes in our Azur range are ‘iPod-compatible’.

Please refer to the remote control section of the Azur product’s manual for more information.

ENGLISH

7