Speaker Connections
To connect the
Push back the red speaker input tab on a satellite, exposing the wire hole.
Fully insert one of the wires with a red band into the wire hole and release the tab.
Repeat the procedure with the adjacent speaker wire and the black speaker input tab on that speaker.
Connect the two wires at the other end of that same speaker cable to the red and black “R” speaker input tabs on the subwoofer. This satellite becomes the Right channel satellite.
Repeat the preceding process to connect the other satellite (making it the Left channel satellite).
AC Connection and Placement
Make sure the Volume On/Off Control is in in the Off position.
Insert the small plug of the Power Adapter into the Subwoofer POWER jack.
Connect the AC plug to a grounded AC receptacle.
Place the main speakers and the subwoofer in your preferred positions, then use the Volume On/Off Control to turn on the power.
15
