Frigidaire FGMV175QF, FGMV175QW Cleaning the exhaust filters, Surface light replacement

Models: FGMV175QW FGMV175QF

1 33
Download 33 pages 61.44 Kb
Page 30
Image 30

CLEANING AND CARE

Disconnect the power cord before cleaning or leave the door open to deactivate the oven during cleaning.

Cleaning the exhaust filters

Surface light replacement

The oven ventilation exhaust filters should be removed and cleaned often; generally at least once every month.

To avoid risk of personal injury or property damage, do not operate oven hood without filters properly in place.

To avoid risk of personal injury or property damage, wear gloves when replacing the light bulbs.

1.Unplug the microwave oven or turn off power at the main circuit breaker.

Surface lights

Front

Rear

2.Remove the bulb cover mounting screws at both light positions under the microwave.

Ventilation

3.

Replace bulb with 30 watt appliance bulb.

filters

 

4.

Re-install bulb cover and mounting screw.

 

5.

Plug the microwave back into the power supply or turn

 

 

the power back on at the main circuit breaker.

1.To remove the exhaust ventilation filters, slide the filter to the rear. Then pull filter downward and push to the other side. The filter will drop out. Repeat for the 2nd filter.

2.Soak the ventilation filters in hot water using a mild detergent. Rinse well and shake to dry or wash in

DGLVKZDVKHU Do not use ammonia. The aluminum on the filter will corrode and darken.

3.To reinstall the exhaust ventilation filter, slide it into the side slot, then push up and toward oven to lock. Reinstall the 2nd filter using the same procedure.

30

Page 30
Image 30
Frigidaire FGMV175QF, FGMV175QW important safety instructions Cleaning the exhaust filters, Surface light replacement