12.Once proper contact has been assured, use the following procedure to tighten the locknuts and secure the lockwasher tabs.

12.1.Back off both locknuts and the lock- washer on one side of the cam.

12.2.Apply Green Perma-Lok‚ to the threads on the input shaft.

12.3.Use a Spanner Wrench that has been locked (jammed) against the top or bot- tom of the housing to hold the locknut while turning the input shaft. Use the motor drive package to rotate the input shaft and tighten the locknut.

12.4.Repeat the previous step to tighten the second locknut on the same side of the cam.

WARNING

CAMCO’s Heavy Duty "E" Series Index Drives cannot be "hand cranked" when completely assembled, i.e. with follower wheel installed. During some portions of repair, the motor drive package is used to rotate the input shaft and follower wheel. Some means for running the motor at extremely low speeds is manda- tory. Use extreme caution when operating the motor during repairs.

13.Bend over the lockwasher tabs towards the locknut and into the slot.

CAUTION

A torque specification for locknuts is not avail- able. Make sure they are tight!

14.Repeat the above steps and tighten the locknuts on the opposite side of the cam.

15.After tightening locknuts, re-apply Prussian Blue and check for tip relief etc.

FOLLOWER WHEEL AND/OR OUTPUT BEARING REPLACEMENT:

FOLLOWER WHEEL REMOVAL:

In most cases, the follower wheel and/or out- put bearing cannot be removed without removing the major portion of any support structure and fixtures. An overhead crane or similar device must be used to lift the follower wheel and output bearing. In some cases, the support structure and fixtures can be lifted two to three feet above the unit and support- ed by appropriate scaffolding. The follower

DWELL POSITION, E-SERIES INDEX DRIVES

wheel and output bearing can then be removed with a boom crane or similar device. CAMCO recommends using professional machinery riggers for this purpose. The assistance of a CAMCO trained serviceman is recommended.

1.Use the motor drive package to position the input shaft keyway such that the cam is just entering dwell.

Note: For most Camco E-Series Index Drives this is ten to fifteen (10˚ - 15˚) degrees clock- wise or counter-clockwise from the mid-dwell position.

17

Page 17 Page 19
Page 18
Image 18
Camco 1550E, 950E, 2050E, 1150E service manual Follower Wheel Removal, Dwell POSITION, E-SERIES Index Drives
Page 17 Page 19

950E, 1550E, 2050E, 1150E specifications

Camco, an industry leader in innovative recreational vehicle (RV) and marine products, offers a range of portable waste tanks designed for convenience and efficiency. The Camco 1150E, 2050E, 1550E, and 950E are key products in this lineup, each designed with unique features and technologies to cater to different user needs.

The Camco 1150E is a robust 11-gallon portable waste tank made from high-density polyethylene. Featuring a patented, heavy-duty design, it can be easily transported and features integrated wheels for smooth maneuverability. The tank includes a large capacity dump valve and a 3" sewer hose with a 90-degree elbow, making emptying a simple and mess-free process. This model also comes with a built-in indicator to alert users when it’s time to empty, ensuring hassle-free maintenance.

The Camco 2050E is a larger 20-gallon option that offers enhanced capacity for extended trips. This model boasts a durable construction resistant to punctures and UV damage, ensuring longevity in various environments. The 2050E is designed with an extra-wide opening for easier filling and features a user-friendly tow design that ensures stability during transport. Its integrated handle and sturdy wheels allow for effortless movement, even on uneven surfaces.

The Camco 1550E is a middle-ground solution with a 15-gallon capacity, perfect for those who need more than the 11-gallon but less than the 20-gallon capacity. It features the same heavy-duty construction found in the 1150E and 2050E models, ensuring durability. It includes a level indicator to gauge fill levels and is designed for easy cleaning post-use, featuring smooth surfaces that reduce dirt accumulation.

Lastly, the Camco 950E is the most compact option at a 9-gallon capacity. Its lightweight design makes it ideal for short trips or users with limited storage space. Despite its smaller size, it retains the essential features such as a 3" drain hose, an easy-grip handle, and sufficient capacity for less frequent RV users.

Each tank in the Camco lineup offers high-quality construction, user-friendly features, and advanced technology to enhance the RV experience. Whether it’s the larger capacity of the 2050E or the compact design of the 950E, Camco has tailored their products to meet a range of consumer needs while ensuring ease of use and maintenance.
Top Page Image Contents