Campbell Hausfeld CHN10600 Tool Components and Specifications, General, Personal Safety

Operating Instructions

Important Safety Instructions			c.	Keep bystanders, children, and		e.	Use safety equipment. A dust mask,
(Continued)				visitors away while operating the			non-skid safety shoes and a hard
GENERAL				tool. Distractions are able to result in			hat must be used for the applicable
				the loss of control of the tool.			conditions.
a.	To reduce the risks of
						f.	Always wear eye
	electric shock, fire, and		PERSONAL SAFETY
	injury to persons, read all		a.	Stay alert. Watch what you are			protection.
						g.	Always wear hearing
	the instructions before			doing and use common sense
	using the tool.			when operating the tool. Do not			protection when using
b. Be thoroughly familiar with the				use the tool while tired or under			the tool. Prolonged
	controls and the proper use of the			the influence of drugs, alcohol,			exposure to high intensity
	equipment. Follow all instructions.			or medication. A moment of			noise is able to cause
	Contact your Campbell Hausfeld			inattention while operating the			hearing loss.
	representative if you have any			tool increases the risk of injury to		h. Do not attach the hose or tool to
	questions.			persons.			your body. Attach the hose to the
c.	Only persons well acquainted with		b. Dress properly. Do not wear loose				structure to reduce the risk of loss of
	these rules of safe operation should			clothing or jewelry. Contain long			balance if the hose shifts.
	be allowed to use the unit.			hair. Keep hair, clothing, and		i.	Always assume that the tool
		Read and		gloves away from moving parts.			contains fasteners. Do not point
		understand tool		Loose clothes, jewelry, or long			the tool toward yourself or anyone
labels and manual. Failure to follow				hair increases the risk of injury to			whether it contains fasteners or not.
warnings, dangers, and cautions could
				persons as a result of being caught
result in DEATH or SERIOUS INJURY.				in moving parts.		j.
WORK AREA
			c.	Avoid unintentional starting.			Do not drive a
							fastener on top of
a.	Keep the work area clean and well			Be sure the switch is off before
							other fasteners. The
	lighted. Cluttered benches and dark			connecting to the air supply. Do not
							fastener could glance and cause
	areas increase the risks of electric			carry the tool with your finger on
							death or a serious puncture wound.
	shock, fire, and injury to persons.			the switch or connect the tool to th		k.			Remove finger
b. Do not operate the tool				air supply with the switch on.
									from the trigger
	in explosive atmospheres,		d.	Do not overreach. Keep proper			when not driving fasteners. Never
	such as in the presence			footing and balance at all times.			carry the tool with finger on trigger,
							the tool is able to fire a fastener.
	of flammable liquids,			Proper footing and balance enables
							Activate the trigger lock when not in
	gases, or dust. The tool is			better control of the tool in
							use.
	able to create sparks resulting in the			unexpected situations.				Always remain in a
	ignition of the dust or fumes.
								firmly balanced
						position when using or handling the
						tool.
Tool Components and Specifications					Adjustable Cap Exhaust

•REQUIRES: 0.15 average SCFM with 10 fasteners per minute @ 90 psi

• AIR INLET: 1/4 inch NPT		Latch
• STAPLE SIZE RANGE: 1/4 inch to 1/2 inch		Button
	Trigger
• MAGAZINE CAPACITY: 100+	Lock
• WEIGHT: 2 lbs., 0 oz.	Magazine
• LENGTH: 9 inch

•HEIGHT: 6.5 inch

Trigger

•MAXIMUM PRESSURE: 100 psi

•PRESSURE RANGE: 60 psi – 100 psi

Fastener Discharge Area

www.chpower.com

2