Operating Instructions

Troubleshooting Chart

Stop using tool immediately if any of the following problems occur. Serious personal injury could occur. Any repairs or replacements must be done by a Qualified Service Person or Authorized Service Center.

Symptom

Possible Cause(s)

Corrective Action

Air leaking at trigger valve

O-Rings in trigger valve housing are

Replace o-rings

area.

damaged

 

 

 

 

 

 

Air leaking between housing

1. Damaged O-Rings

1.

Replace o-rings

and nose.

2.

Damage to bumper

2.

Replace bumper

 

 

 

 

 

Air leaking between housing

1. Loose screws

1.

Tighten screws

and cap.

2.

Damaged gasket

2.

Replace gasket

 

 

 

 

 

Tool skips driving fastener

1. Worn bumper

1.

Replace bumper

 

2.

Dirt in nose piece

2.

Clean drive channel

 

3.

Dirt or damage prevent fasteners or

3.

Clean magazine

 

 

pusher from moving freely in magazine

 

 

 

4.

Damaged pusher spring

4.

Replace spring

 

5.

Inadequate air flow to tool

5.

Check fitting, hose, or compressor

 

6.

Worn O-Ring on piston or lack of

6.

Replace and lubricate o-rings

 

 

lubrication

 

 

 

7.

Damaged O-Ring on trigger valve

7.

Replace o-rings

 

8.

Air leaks

8.

Tighten screws and fittings

 

9.

Cap gasket leaking

9.

Replace gasket

 

 

 

 

Tool runs slow or has loss of

1. Tool not lubricated sufficiently

1.

Lubricate tool

power

2.

Broken spring in cylinder cap

2.

Replace spring

 

 

3.

Exhaust port in cap is blocked

3.

Replace damaged internal parts

 

 

 

 

Fasteners are jammed in tool

1. Guide on driver is worn

1.

Replace guide

 

2.

Fasteners are not correct size

2.

Use only recommended fasteners

 

3.

Fasteners are bent

3.

Replace with undamaged fasteners

 

4.

Magazine or nose screws are loose

4.

Tighten screws

 

5.

Driver is damaged

5.

Replace driver

www.chpower.com

6

Page 5 Page 7
Page 6
Image 6
Campbell Hausfeld CHN10600 specifications Troubleshooting Chart
Page 5 Page 7

CHN10600 specifications

The Campbell Hausfeld CHN10600 is an innovative air compressor that combines efficiency and reliability for both home and professional use. Known for its versatility, this model stands out with a range of features that cater to various tasks, making it an essential tool for DIY enthusiasts and professionals alike.

One of the most notable features of the CHN10600 is its 3-gallon tank. This compact size strikes a perfect balance between portability and sufficient air storage, enabling users to operate tools for extended periods without frequent refilling. The 1.0 horsepower motor powers this compressor, delivering a maximum pressure of 100 PSI, which is ample for a variety of applications including inflating tires, powering pneumatic tools, and more.

The CHN10600 is equipped with an oil-free pump, which not only minimizes maintenance but also enhances usability. The oil-free design eliminates the need for regular oil changes, saving time and effort for users. This feature also contributes to the compressor's compact nature, making it lightweight and easy to transport, whether you are moving it from the garage to the workshop or taking it to a job site.

One of the standout technologies integrated into the CHN10600 is its low noise operation. This model is designed to operate quietly, making it ideal for residential areas or situations where noise reduction is a priority. The sound level is significantly lower than traditional compressors, allowing for a more comfortable working environment.

Furthermore, the Campbell Hausfeld CHN10600 boasts a user-friendly control panel that features easy-to-read gauges, making it simple for users to monitor pressure levels at a glance. The built-in regulator allows for precise adjustments, enabling users to tailor the output to the specific needs of their tools or projects.

Durability is a key characteristic of the CHN10600. It features a robust construction designed to withstand the rigors of frequent use, making it a reliable choice for both home and professional applications. With its combination of efficiency, low maintenance, and portability, the Campbell Hausfeld CHN10600 air compressor is a versatile and practical tool that meets the demands of various tasks while providing excellent performance. Whether you are inflating tires, brad nailing, or using airbrushes, this model delivers satisfying results with ease.
Top Page Image Contents