Operating Instructions and Parts Manual

Pin Nailer

Description

This pin nailer is designed for tacking decorative trim, glazing strips, and picture frame assembly. Features include: convenient side loading magazine which holds up to

135 pins, no-mar tip, oil free, rubber comfort grip, swivel plug, work contact element, self-adjusting pin length mechanism, and adjustable exhaust.

Specifications

Model CHN71500

Requires: 0.15 Avg SCFM using 10 fasteners per minute at 90 psi

Air Inlet: 1/4 inch NPT

Fastener Size Range:

23g micropins - 3/8 inch to 7/8 inch

Magazine Capacity: 135 fasteners per load

Weight: 2 lbs.

Length: 9-1/4 inches

Height: 7-1/4 inches

Maximum Pressure: 100 psi

Pressure Range: 60 psi to 100 psi

 

Locate model number and date code on

Figure 1 - CHN71500 Pin Nailer

magazine and/or tool body. Record below:

 

Model #: _____________________________

 

Date Code: ___________________________

 

Retain these numbers for future reference.

www.chpower.com 3