Operating Instructions

 

 

 

CHN10302, CHN10310

 

 

 

 

 

 

 

 

 

 

 

 

 

Important Safety Instructions

c.

Keep bystanders, children, and

e.

Use safety equipment. A dust mask,

(Continued)

 

visitors away while operating the

 

non-skid safety shoes and a hard

General

 

tool. Distractions are able to result in

 

hat must be used for the applicable

 

the loss of control of the tool.

 

conditions.

a.

To reduce the risks of

 

 

 

 

 

 

f.

Always wear eye

 

 

electric shock, fire, and

 

Personal Safety

 

 

injury to persons, read all

 

a.

Stay alert. Watch what you are

 

protection.

 

 

 

 

 

 

 

 

 

 

 

the instructions before

 

g.

Always wear hearing

 

 

 

 

doing and use common sense

 

 

 

 

 

using the tool.

 

 

protection when using

 

 

 

when operating the tool. Do not

 

 

 

 

 

 

b. Be thoroughly familiar with the

 

use the tool while tired or under

 

the tool. Prolonged

 

 

controls and the proper use of the

 

the influence of drugs, alcohol,

 

exposure to high intensity

 

 

equipment. Follow all instructions.

 

or medication. A moment of

 

noise is able to cause

 

 

Contact your Campbell Hausfeld

 

inattention while operating the

 

hearing loss.

 

 

 

 

 

 

representative if you have any

 

tool increases the risk of injury to

h.

Do not attach the hose or tool to

 

questions.

 

persons.

 

your body. Attach the hose to the

c.

Only persons well acquainted with

b.

Dress properly. Do not wear loose

 

structure to reduce the risk of loss of

 

these rules of safe operation should

 

clothing or jewelry. Contain long

 

balance if the hose shifts.

 

be allowed to use the unit.

 

hair. Keep hair, clothing, and

i.

Always assume that the tool

 

 

Read and

 

gloves away from moving parts.

 

contains fasteners. Do not point

 

 

 

 

 

 

understand tool

 

Loose clothes, jewelry, or long

 

the tool toward yourself or anyone

 

 

 

 

labels and manual. Failure to follow

 

hair increases the risk of injury to

 

whether it contains fasteners or not.

warnings, dangers, and cautions could

 

 

 

persons as a result of being caught

j.

 

 

 

 

Do not nail on

result in DEATH or SERIOUS INJURY.

 

 

 

 

 

 

in moving parts.

 

 

 

 

Work Area

 

 

 

 

 

 

top of another

 

 

 

 

 

 

c.

Avoid unintentional starting.

 

nail. This is able to cause the nail to

 

 

 

 

 

be deflected and hit someone, or

a.

Keep the work area clean and well

 

Be sure the switch is off before

 

 

 

cause the tool to react and result in a

 

lighted. Cluttered benches and dark

 

connecting to the air supply. Do not

 

 

 

 

risk of injury to persons.

 

areas increase the risks of electric

 

carry the tool with your finger on

k.

 

 

 

 

Remove finger

 

shock, fire, and injury to persons.

 

the switch or connect the tool to the

 

 

 

 

 

 

 

 

 

 

 

from the trigger

 

 

 

 

 

 

 

 

 

 

 

 

air supply with the switch on.

 

 

 

 

 

b. Do not operate the tool

 

 

 

when not driving fasteners. Never

 

 

 

 

in explosive atmospheres,

 

d.

Do not overreach. Keep proper

 

carry the tool with finger on trigger,

 

such as in the presence

 

 

footing and balance at all times.

 

the tool is able to fire a fastener.

 

of flammable liquids,

 

 

Proper footing and balance enables

 

 

 

 

Always remain in a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gases, or dust. The tool is

 

better control of the tool in

 

 

 

 

firmly balanced

 

 

position when using or handling the

 

able to create sparks resulting in the

 

unexpected situations.

 

 

tool.

 

ignition of the dust or fumes.

 

 

 

 

 

 

 

 

 

Avoid long extended

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

periods of work

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

with the tool. Stop using the tool if you

 

 

 

 

 

 

feel pain in hands or arms.

Tool Components and Specifications

•Requires: 0.3 SCFM with

10 nails per minute @ 90 psi

•Air inlet: 1/4 inch NPT

•nail SIZE RANGE: 3/8 inch to 1-1/4 inch

•MAGAZINE CAPACITY:

100 Staples per load, 18 gauge

•WEIGHT: 2 lbs. 15 oz.

•LENGTH: 10-1/2 inches

•HEIGHT: 9-1/2 inches

•MAXIMUM PRESSURE: 100 psi

•PRESSURE RANGE: 60 psi – 100 psi

Work Contact

 

Quick Clear Nose

Element (WCE)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fastener

Discharge

Area Area

LoadingFastener

Magazine

Latch

Cap Exhaust

Trigger

Air

Inlet

www.chpower.com

2