Operating Instructions and Parts Manual

Angle Finish Nailer

Description

This nailer is designed for decorative trim, molding, window and door casings, furniture trim, door jamb installation, and picture frame assembly. Features include: convenient rear loading magazine which holds up to 100 nails, tethered no-mar tip with stud finder function, quick clear nose, an adjustable depth of drive mechanism, oil free, electronic low nail indicator, nail placement laser pointer, in-line magazine, bubble level, anti-dry fire, conversion trigger with safety lockout, rubber comfort grip, swivel plug, and adjustable exhaust.

Specifications

Model CHN70600

Requires: 1.0 Avg SCFM using 10 fasteners per minute at 90 psi

Air Inlet: 1/4 inch NPT

Fastener Size Range:

1 inch to 2-1/2 inch 15g 35° D-clipped head angle finish nails

Magazine Capacity: 110 fasteners per load

Weight: 5 lbs., 8 oz.

Length: 14 inches

Height: 13 inches

Maximum Pressure: 120 psiPressure Range: 70 psi to 120 psiBatteries: Two (2) AAA

Laser: Class IIIA

Wavelength:

640 nm - 660 nm

Radiant Power:

1.53 < 5 mW

 

Locate model number and date code on

Figure 1 - CHN70600 Angle Finish Nailer

magazine and/ or tool body. Record below:

 

Model #: _____________________________

 

Date Code: ___________________________

 

Retain these numbers for future reference.

www.chpower.com 3