Campbell Hausfeld CHN70600, IN727501AV Anti-DryFire, Bubble Level, Tethered No-mar, Stud finder tip, Low Nail Indicator Lights, Nail Placement Laser Pointer

Operating Instructions and Parts Manual CHN70600

Getting To Know Your Angle Finish Nailer Like A Pro

Bubble Level	Conversion Switch Electronics		Tethered No-
		ADC	mar / Stud
	ON / OFF
			finder Tip
	Switch	Thumbwheel
Adjustable			Work
			Contact
Exhaust
			Element
Deflecter
			(WCE)
			Stud Finder
			Light
Trigger			Low Nail
			Indicator Light
		Battery Cover/
		Compartment
Rubber Comfort
Grip		No-mar tip Storage Post
		Pull-out Warning
		Decal
Swivel Plug		Magazine

	Quick Clear Nose
	Cover	Pusher Latch Button
Laser
Electronics
Audio
Speaker		Nail Pusher
Stud Finder		Stud Finder
		Operation
Light	Low Nail	Button
	Indicator
	Light

Nail Loading Area

Figure 6 - Components of the Angle Finish Nailer

Features

Anti-Dry Fire

This tool is equipped with an Anti-Dry Fire feature. This prevents the Work Contact Element (WCE) from being pushed in when only a few nails remain. Simply load new nail clip behind remaining nails to continue shooting.

Tethered No-mar /Stud finder tip

The tool is fitted with a no-mar tip which also acts as a convenient stud finder. To utilize the no-mar tip, simply slide it over the tools WCE.

Low Nail Indicator Lights

The tool is equipped with lights on either side of the tool near the nose. When the nail count becomes low, the lights will turn yellow. When the nail count is nearly out, the Anti-Dry Fire feature will engage and the lights will turn red. (See Loading the Nailer section).

Nail Placement Laser Pointer

The tool is equipped with a laser mounted near the nose. This can be seen through the wide slots in the WCE and / or no- mar tip. The laser will indicate exact placement of the fastener.

This is a Class IIIA Laser Product that

emits laser radiation. Do not stare into beam or view directly with optical instruments.

Bubble Level

The tool is equipped with a bubble level located on the head cap. This will assist in aligning the tool for level driving of the fastener. The bubble level will assist in vertical and horizontal positioning of the tool.

www.chpower.com 9