120￿psi MAX.

See Warranty on page 8 for important information about commercial use of this product.

Operating Instructions
Models NS219001, NS219500, NS319001 & NS349001

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference.

Framing Nailer

Table Of Contents

General Safety . . . . . . . . . . . . 1-2

Specifications . . . . . . . . . . . . . . 2

Operating The Nailer . . . . . . . . 3

Operational Modes. . . . . . . . . . 4

Troubleshooting . . . . . . . . . . . . 7

Fasteners . . . . . . . . . . . . . . . . . . 7

Warranty . . . . . . . . . . . . . . . . . . 8

Description

This nailer is designed for framing, trusses, sub-floors, sheathing, exterior decks, and pallet/create assembly. Features include: convenient top loading magazine, no-mar tip, adjustable exhaust, single cycle trigger, and an adjustable depth of drive mechanism.

General Safety Information

This manual contains safety, operational and maintenance information.

Read this manual and understand all safety warnings and instructions

before operating the nailer. MANUAL Contact your Campbell

Hausfeld representative if you have any questions.

CALIFORNIA PROPOSITION 65

You can create dust when you cut, sand, drill or grind materials such as wood,

paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.

OPERATOR’S RESPONSIBILITY:

Before operating the nailer, read and understand all safety warnings and labels. Follow the operating instructions outlined in this manual.

EMPLOYER’S RESPONSIBILITY:

Distribute this instruction manual to all users before allowing use of the nailer.

Ensure all operators read, understand and follow all safety warnings, labels and instructions outlined in this manual.

Danger indicates

an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Do not use any type

 

 

of flammable gases or

 

 

oxygen as a power

 

 

source for the nailer.

 

O CO

Use filtered,

 

2

 

 

lubricated, regulated

 

 

 

 

compressed air only. Use of a

compressed gas instead of

compressed air may cause the nailer

to explode which will cause death or

serious personal injury.

 

Do not exceed maximum operating

pressure of the nailer (120 psi). The nailer will not function properly. Do not use a compressed air source capable of more than 200 psi. The nailer could explode which will cause death or serious personal injury.

Never use gasoline or

other flammable liquids to clean the

nailer. Never use the nailer in the presence

of flammable liquids or gases. Vapors could ignite by a spark and cause an explosion which will result in death or serious personal injury.

Always remain in a

firmly balanced position when using or handling the nailer.

Do not modify or

disable the Work Contact Element (WCE). Do not tie or tape the WCE or trigger in a depressed

position. Death or serious personal injury could result.

Locate model and date code on tool and record below:

Model No. ________________________

Date Code ________________________

Retain these numbers for

future reference.

Do not touch the trigger unless driving

nails. Never attach air line

to nailer or carry nailer while touching

the trigger. The

tool could eject a fastener which will result in death or serious personal injury.

Warning indicates

a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Always disconnect nailer from air line before clearing jams, adjusting or servicing the

nailer, relocating the nailer, or when the nailer is not in use. Always reconnect the air line BEFORE loading any fasteners.

REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.

Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National

IN715702AV 2/08

Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002.

 

© 2008 Campbell Hausfeld / Scott Fetzer

For parts, product & service information

 

visit www.chpower.com