Operating Instructions
The nailer could eject a fastener causing death or serious personal injury.
●Protect your eyes and ears. Wear Z87
safety glasses, with 
side shields. Wear hearing protection. Employers and users are responsible for ensuring the user or anyone near the nailer wears this safety protection. Serious eye injury or permanent hearing loss could result.
●Do not use a check valve or
any other fitting which
allows air to remain in the nailer. Death or
serious personal injury could occur.
●Never place hands or any other body parts in the nail discharge area of the nailer. The nailer might
eject a fastener and could result in death or serious personal injury.
●Never carry the nailer by the air hose or pull the hose to move the nailer or a
compressor. Keep hoses away from
heat, oil and sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool damage could occur.
●Always assume the nailer contains nails. Never use the nailer as a toy. Do not engage in horseplay. Always keep others at a safe distance from the work area in case of accidental
discharge of nails. Never point the nailer at anyone. Accidental triggering of the nailer could result in death or serious personal injury.
●Do not drive a
nail on top of other nails. The nail could glance and cause death or a serious puncture wound.
●Do not operate
or allow anyone
else to operate the nailer if any warnings or warning labels are not legible.
Warnings or warning labels are located on the nailer magazine and body.
●Never leave the nailer unattended or connected to an air compressor when not in use. Serious personal injury can occur if someone picks up and uses the nailer without knowing the correct way to operate the nailer.
●Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur.
Caution indicates a potentially hazardous situation which,
if not avoided, MAY result in minor or moderate injury.
●Do not modify or alter the nailer or any nailer parts. Do not use the nailer if any shields or guards are removed or altered. Do not use the nailer as a hammer. Personal injury or tool damage may occur.
●Avoid long extended periods of work with the nailer. Stop using the nailer if you feel pain in hands or arms.
●Always check that the Work Contact Element (WCE) is operating
properly. A nail could
accidentally
be driven if the WCE is not working properly. Personal injury may occur (See "Checking the Work Contact Element" Section).
●Disconnect air supply and release tension from the pusher before attempting to clear jams because fasteners can be ejected from the front of the nailer. Personal injury may occur.
Notice indicates
important information, that if not followed, may cause damage to equipment.
●Avoid using the nailer when the magazine is empty. Accelerated wear on the nailer may occur.
●Clean and check all air supply hoses and fittings before connecting the nailer to an air supply. Replace any damaged or worn hoses or fittings. Tool performance or durability may be reduced.
●Air compressors providing air to the nailer should follow the requirements established by the American National Standards Institute Standard
Nailer Components And Specifications |
| Adjustable Direction Exhaust Deflector | |||
|
|
| NS319001 |
| |
| NS219001 | NS219500 | NS349001 | Trigger | |
| • REQUIRES |
|
|
| Nail Loading Area | |
|
|
|
| ||
(SCFM with 16 nails | 4.1 | 4.1 | 4.1 |
| |
per minute @ 90 psi) |
|
|
|
| |
| • AIR INLET | 1/4” NPT | 1/4” NPT | 1/4” NPT |
| |
| • NAIL LENGTH | 2” to | 2” to | 2” to |
| |
| RANGE | 31⁄2” | 31⁄2” | 31⁄2” |
| |
| • NAIL SHANK | 0.113” to | 0.113” to | 0.113” to | Magazine | |
RANGE | 0.131” | 0.131” | 0.131” | ||
| • MAGAZINE |
|
|
|
| |
| CAPACITY | Warning Labels | ||||
|
|
|
| ||
| • WEIGHT | 9 lbs 3 oz | 7 lbs 6 oz | 9 lbs 2 oz | (Backside) | |
| • LENGTH | 19.25” | 19.25” | 18.50” | Debris Shield | |
|
|
|
| ||
| • HEIGHT | 15.25” | 15.25” | 15.00” | Work Contact Element | |
| • MAX. PRESSURE | 120 psi | 120 psi | 120 psi | ||
| |||||
| • PRESSURE RANGE | 70 - 120 psi | 70 - 120 psi | 70 - 120 psi | Nail Discharge Area | |
| |||||
www.chpower.com
2