See Warranty on page 6 for important information about commercial use of this product.
Operating Instructions | Model SN258K |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference.
BUILT TO LAST
Finishing Stapler
Table of Contents
General
Specifications . . . . . . . . . . . . . . .2
Operating The
Warranty . . . . . . . . . . . . . . . . . .6
Description
This stapler is designed for cabinetry, casebacks, decorative trim and crafts. Features include: convenient bottom loading magazine which holds up to 100 staples, sequential trip safety mechanism and a narrow nose for accurate fastener placement in tight applications.
General Safety
Information
CALIFORNIA PROPOSI-
TION 65
! DANGER Youcan
create dust when you cut, sand, drill or grind materi-
als such as wood, paint, metal, con- crete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
Excessive exposure ! WARNING to vibration, work-
ing in awkward positions and repeti- tive work motions can cause injury to hands and arms. Stop using any tool if discomfort, numbness, tingling or pain occur and consult a physician.
This manual contains safety, opera- tional and maintenance information. Contact your Campbell Hausfeld repre- sentative if you have any questions.
OPERATOR’S RESPONSIBILITY:
The tool operator is responsible for:
•Reading and understanding tool labels and manual.
•Selecting an appropriate tool actua- tion system, taking into considera- tion the work application for which the tool is used.
•The safe use of the tool.
•Ensuring that the tool is used only when the
operator and all other personnel in
the work area are
wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equip- ment such as head, hearing and foot protection equipment. Serious eye or permanent hearing loss could result.
•Assuring that the tool is kept in safe working order as described in this manual.
EMPLOYER’S RESPONSIBILITY:
•Selecting an appropriate tool actua- tion system, taking into considera- tion the work application for which the tool is used.
•Ensuring that this manual is available to operators and personnel perform- ing maintenance.
•The safe use of the tool.
•Enforcing that the tool is used only
when the operator and all other person-
nel in the work area
are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equip- ment such as head, hearing and foot protection equipment. Serious eye or permanent hearing loss could result.
•Assuring that the tool is kept in safe working order as described in this manual.
Model SN258K
Locate model and date code on tool magazine and cap and record below:
Model No. ________________________
Date Code ________________
Retain these numbers for
future reference.
•Assuring the proper maintenance of all tools in employer’s possession.
•Ensuring that tools which require repair are not further used before repair. Tags and physical segrega- tion are recommended means of control.
Danger indicates
! DANGER an imminently hazardous situation which, if not avoided, WILL result in death or seri- ous injury.
●Read and understand tool labels and manual. Failure to follow warn- ings, dangers, and cau- tions could result in DEATH or SERIOUS INJURY.
● Do not use any type |
|
|
|
|
|
|
|
|
| ||
|
|
|
| ||
of reactive gases, |
|
|
|
|
|
|
|
|
| ||
|
|
|
| ||
including, but not |
| O |
|
|
|
limited to, oxygen |
|
| CO2 | ||
|
|
| |||
and combustible |
|
|
|
|
|
gases, as a power |
|
|
|
|
|
|
|
|
|
| |
source. Use filtered, lubricated, reg- ulated compressed air only. Use of a
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA
© 2003 Campbell Hausfeld/Scott Fetzer
For parts, product & service information | IN231204AV 7/03 |
visit www.chpower.com
