INSTALLATION INSTRUCTIONS

UNPACKING THE COOKER

Unpack the components from inside the grill and oven: Check that the following parts are present.

Grill pan and grid Baking dish

Main oven shelves (3) Aluminium burner bodies (4) Literature

Top oven/grill shelf heat shield Pan supports (4)

Enamelled burner caps (4) Main oven shelf heat shield Top oven/grill shelf (1)

LEVELLING

Two rear wheels and two front feet are fitted which can be adjusted up or down to set the height (900mm - 915mm) and level the cooker.

1.The rear wheels can be raised or lowered from the BACK of the cooker by adjusting the levelling screws ‘A’ in the plinth.

2.The front feet can be simply screwed in or out to lower or raise the front of the cooker.

CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully.

Viewed from rear

33

Page 33
Image 33
Cannon 10592G, 10593G, 10595G, 10598G installation instructions Unpacking the Cooker, Levelling