INSTALLATION INSTRUCTIONS

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the data badge which is fitted on the back panel.

This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. particular attention should be given to the relevant requirements regarding ventilation.

MODEL NUMBERS 10450G, 10455G, 10456G

Category II2H3+ (GB. IE)

This model is set to burn NATURAL GAS (G20) at 20 mbar but can be converted for use on BUTANE (G30) at 28-30mbar or PROPANE (G31) at 37mbar with the use of a service kit supplied with the appliance or available from our Service and Genuine Parts and Accessories department (see back cover).

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law.

In the UK, CORGI registered installers work to safe standards of practice. The cooker must also be installed in accordance with BS 6172.

Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

LOCATION

The cooker may be located in a kitchen, kitchen/diner or a bed-sitting room, but not in a room containing a bath or shower. The cooker must not be installed in a bed-sitting room of less than 20m3.

When adjusted for use on BUTANE (G30) or PROPANE (G31) the cooker must not be installed in a room or internal space below ground level, eg. in a basement.

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440: Part 2.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2 should be consulted to determine air vent requirements.

27

Page 26 Page 28
Page 27
Image 27
Cannon PROESSIONAL1000 Installation Instructions, GAS Safety Installation & USE Regulations, Location
Page 26 Page 28

PROESSIONAL1000 specifications

The Canon PROFESSIONAL1000 printer represents a significant advancement in the realm of high-quality printing, tailored specifically for professional photographers and artists. This state-of-the-art printer combines cutting-edge technology with robust features that address the demands of printmakers who require exceptional detail and vibrant color reproduction.

At the core of the Canon PROFESSIONAL1000 is its advanced LUCIA PRO ink system, which consists of a 12-color pigment ink set. This includes a new Chroma Optimizer ink designed to enhance glossiness and reduce metamerism, ensuring that prints maintain their vibrancy under various lighting conditions. The combination of vivid colors and deep blacks allows for striking contrasts and a wide color gamut, making it ideal for both color and monochrome photography.

Another prominent feature of the PROFESSIONAL1000 is its large print size capabilities, accommodating media up to 17 inches wide. This enables users to create gallery-quality prints that stand out. The printer supports various media types, including fine art paper, glossy paper, and canvas, providing flexibility for artists and photographers to explore different textures and finishes.

Additionally, the Canon PROFESSIONAL1000 is equipped with a high-resolution printing engine that achieves an impressive maximum resolution of 2400 x 1200 dpi. Coupled with the printer’s precision print head technology, this ensures that every print is rendered with immaculate detail and sharpness, essential for professional-quality outputs.

Connectivity options are extensive, featuring USB, Ethernet, and Wi-Fi capabilities, enabling seamless integration into various workflows. Furthermore, the printer is compatible with popular software solutions like Canon's Professional Print & Layout application as well as third-party software, allowing for efficient editing and printing processes.

Another noteworthy aspect of the Canon PROFESSIONAL1000 is its user-friendly interface, which includes an intuitive LCD touchscreen that simplifies navigation through settings and print options. This ensures that even those relatively new to high-end printers can operate it with ease.

In summary, the Canon PROFESSIONAL1000 combines advanced ink technology, exceptional print quality, versatility in media handling, and user-friendly features to deliver a top-tier printing experience for professionals in photography and fine art. It stands as a testament to Canon's commitment to innovation in the printing industry, catering to the specific needs of creatives who demand excellence in their printed works.
Top Page Image Contents