Canon 10, optura20 5. Record the still image, Selecting the Focusing Point, 3. Press the PHOTO button fully, 2. Set the program selector to Q

3. Press the PHOTO button fully.

	• F disappears and you hear a shutter sound.
E	• The card access indicator flashes and the card access display
	appears.
	• The still image shown on the screen will be recorded on the memory card.

❍To use the self-timer ( 68), press the (self-timer) button before step 2

and press the PHOTO button fully.

❍If the subject is not suitable for autofocus, the focusing frame turns yellow and locks the focus. The confirmation sound beeps once. Adjust the focus manually with the focus ring.

❍The focusing frame gives an indication of the focusing point. Depending on the size of the subject or the distance, the camcorder may focus outside the frame.

❍When the subject is too bright (overexposed), “OVEREXP” starts flashing. If you have turned off the built-in ND filter, we recommend changing the setting back to AUTO. Open the menu and select [CAMERA SET UP]. Select [ND FILTER], set it to [AUTO] and close the menu.

❍“OVEREXP” does not appear when you press the EXP button.

Using a Memory Card

Selecting the Focusing Point

CAMERA	PLAY (VCR)	CARD CAMERA	CARD PLAY (VCR)
			FINE
1. Set the camcorder to CARD CAMERA mode.
			50

A white focusing frame appears in the center of the screen.

2. Set the program selector to Q.

3. Turn the selector dial to display all focusing frames.	FINE
	50

Three focusing frames appear on the screen, one of it in green.

4. Turn the selector dial to select the focusing point.	FINE
	50
Turn the selector dial up to select the frame to the right, down

to select the frame to the left.

5. Record the still image.

❍If you operate the zoom lever, press the EXP button or do not press the PHOTO

button within 4 seconds, the frames other than the selected one disappear.

106