Connecting to a Computer Using a USB Cable

You can download images from the memory card to a computer using the supplied USB cable. With the supplied software, you can easily download, browse and archive images, and arrange still images for printout.

For instructions on how to connect the camcorder to the computer, and install and operate the software, refer to the DIGITAL VIDEO SOLUTION DISK Software Instruction Manual.

• Refer also to the computer instruction manual.

• “PC CONNECT ” appears to indicate that the camcorder is PC CONNECT connected to the computer via USB cable.

❍Do not disconnect the USB cable, remove the memory card, change the position of the POWER switch or turn off the camcorder and computer while data is being transferred to the computer (while the camcorder’s card access indicator is flashing). Doing so may damage the memory card’s data.

❍Operation may not work correctly depending on the software and the specifications/settings of your computer.

❍The image file on your memory card and the image files saved on the hard disk drive of your computer are valuable, original data files. If you wish to use image files on your computer, make copies of them first, and use the copied file, retaining the original.

❍We recommend powering the camcorder from a household power source

while it is connected to the computer.

❍For transferring recordings from to a computer using a DV cable, see p. 100.

❍Still images/movies recorded on a tape cannot be transferred to a computer via USB interface.

E

Card Memory a Using

135