Canon 10, optura20 9.VCR: Stop playback, 6.VCR: Play back the tape, Example: AV Insert from a VCR, Connect the camcorder to the VCR, 1.Connect the camcorder to the VCR

E

Example: AV Insert from a VCR

CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA

1.Connect the camcorder to the VCR.

See Playing Back on a TV Screen ( 40).

2.VCR: Load a recorded cassette. Locate the scene you wish to insert and pause playback shortly before the scene.

3.Set the camcorder to PLAY (VCR) mode and load a recorded cassette.

Make sure the tape-protect switch is set to allow recording.

4.Locate the scene you wish to replace and pause playback shortly before the scene.

You can use the playback buttons on the camcorder or the special playback buttons on

Editing

the wireless controller.

5.Press the AV INSERT button on the wireless controller.

“AV INSERT” and “2a” appear.

6.VCR: Play back the tape.

7.Press the PAUSE a button on the wireless controller when the scene you wish to insert appears.

8.Press the STOP 3 button on the wireless controller to stop inserting.

Press the PAUSE a button on the wireless controller to pause inserting.

9.VCR: Stop playback.

12bit		STOP
AUDIO OUT
AUDIO DUB.	PAUSE	SLOW		2
	AV INSERT	AV	DV	REMOTESET
REC
PAUSE
ZEROSET	REW	PLAY		FF
MEMORY
12bit		STOP
AUDIO OUT
AUDIO DUB.	PAUSE	SLOW		2
	AV INSERT	AV	DV	REMOTESET
ZEROSET	REW	PLAY		FF
MEMORY
12bit		STOP
AUDIO OUT
AUDIO DUB.	PAUSE	SLOW		2
	AV INSERT	AV	DV	REMOTESET

Set the zero set memory at the end of the scene you wish to replace. The camcorder will automatically stop AV insert at that point.

96