Recording Motion JPEG Movies on a Memory Card

You can record Motion JPEG movies with the camcorder, from a tape in the camcorder

( 114), or from devices connected via the AV terminal (analog line-in) or the DV

terminal ( 114).

❍ Do not turn off the camcorder, disconnect the power source or remove the memory card while the card access display (<<< or >>>) in the upper right corner of the screen or the card access indicator is flashing. Doing so could result in data damage.

E

❍ When you are using a SD Memory Card, make sure that the protect switch is set to allow recording.

❍ Do not load/unload a cassette during recording.

❍ Make sure to insert a memory card with enough remaining capacity. ❍ The sound of a movie recorded on a memory card will be monaural.

Recording with the Camcorder

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY (VCR)

1. Set the camcorder to CARD CAMERA mode.

2. Press the start/stop button to begin recording.

You can record up to 10 seconds in 320 ⋅ 240 and up to 30 seconds in 160 ⋅ 120.

3.Press the start/stop button to stop recording.

The camcorder starts writing the movie on the memory card.

To use the self-timer ( 68), press the (self-timer) button before step 2 and press the start/stop button.

Card Memory a Using

113