Canon 10, optura20 List of Messages

List of Messages

E	Message	Explanation
	SET THE TIME ZONE,	You have not set the time zone, date and time. This message	25
	DATE AND TIME	appears each time you turn the power on until you set the
		time zone, date and time.
	CHANGE THE	Battery pack is exhausted. Replace or charge the battery	16
	BATTERY PACK	pack.
	THE TAPE IS SET FOR	Cassette is protected. Replace the cassette or change the	23
	ERASURE PREVENTION	position of the protect switch.
	REMOVE THE	Camcorder stopped operating to protect the tape. Unload	22
	CASSETTE	and reload the cassette.
	CHECK THE DV INPUT	DV cable is not connected, or the connected digital device is	89
		turned off.
	CONDENSATION HAS	Condensation has been detected in the camcorder.	148
	BEEN DETECTED
	TAPE END	Tape reached the end. Rewind the tape or replace the	22
		cassette.
	CHECK THE CASSETTE	You attempted to perform audio dubbing or AV insert on a	52
	[REC MODE]	tape recorded in a mode other than the SP mode.
	CHECK THE CASSETTE	You attempted to perform audio dubbing on a tape	97
	[AUDIO MODE]	recorded in 16-bit or 12-bit 4-channel sound.
	CHECK THE CASSETTE	You attempted to perform audio dubbing or AV insert on a	95
	[BLANK]	tape with a blank section.
	HEADS DIRTY, USE	Video heads are dirty. Clean the video heads.	148
	CLEANING CASSETTE
	COPYRIGHT PROTECTED	You attempted to play back a copyright protected tape.	92
	PLAYBACK IS RESTRICTED
	COPYRIGHT	You attempted to dub a copyright protected tape. May also	92
	PROTECTED DUBBING	appear when an anomalous signal is received during analog
	RESTRICTED	line-in recording, or during analog-digital conversion of a
		copyright protected tape.

Additional Information

144