with a true S.O.S. function. With the power switch (1) in the SOS position a true S.O.S. light signal is generated. This feature can also be used to test the flash.
Attention Use the S.O.S. signal only when really needed and never use it to discharge the battery.
9 DISPLAY ERROR CODES
If an error is recognized by the micro processor, a code is shown on the display, an audible alarm is emitted and all the activities of the flash are stopped. This error information is used to identify the cause and for security reason.
HI The temperature inside the flash is above 65°C. This happens if the unit was left in the sun or in a hot place. Allow the unit to cool down before switching it on again.
10 MAINTANANCE
Rinse your flash using fresh water after every dive in the sea and dry it carefully. Clean with a mild cleaner and lubricate the threads regularly.
S6 and N5 sockets require particular care and attention. Make sure that the contacts are given regular inspection that the plugs are clean and
S6 SOCKET
The S6 plug is a very safe and sturdy plug in system. Its contact system is very precise and secure, combined with a 4 time
