Changing Image Playback Settings

3 Setting the LCD Monitor Brightness

You can adjust the brightness of the LCD monitor to make it easier to read.

1 2

Select [LCD brightness].

Under the [6] tab, select [LCD brightness], then press <0>.

Adjust the brightness.

While referring to the gray chart, turn the <5> dial, then press <0>.

To check the image’s exposure, you should look at the histogram (p.118).

3 Setting the Image Review Time

How long the image is displayed on the LCD monitor immediately after capture can be set. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off].

1 Select [Review time].

Under the [1] tab, select [Review time], then press <0>.

2Set the desired review time.

Turn the <5> dial to select the time, then press <0>.

If [Hold] is set, the image will be displayed until the auto power off time elapses.

125