Installing and Removing the Battery

Installing the Battery

Load a fully charged BP-511A battery pack into the camera.

1

2

Open the battery compartment cover.

Slide the lever as shown by the arrow and open the cover.

Insert the battery.

Point the battery contacts downward. Insert the battery until it locks in place.

3 Close the cover.

Press the cover until it snaps shut.

Battery Pack BP-514, BP-511, or BP-512 can also be used.

Checking the Battery Level

When the power switch is set to <1> or <J> (p.32), the battery level will be indicated in one of four levels:

z : Battery level OK.

x : Battery level is low.

b: Battery will be exhausted soon.

n: Battery must be recharged.

26