wPrinting

Trimming the Image

You can crop the image and print only the trimmed portion as if the image was

recomposed. Do the trimming right

before printing. If you set the trimming and then set the print settings, you may have to set the trimming again.

1On the print setting screen, select [Trimming].2 Set the trimming frame size, position, and proportion.

The image area within the trimming frame will be printed. The shape of the trimming frame can be changed with [Paper settings].

Changing the trimming frame size

When you press the <u> or <I> button, the size of the trimming frame will change. The smaller the trimming frame, the larger the image magnification will be for the printing.

Moving the trimming frame

Use <9> to move the frame over the image vertically or horizontally. Move the trimming frame until it shows the desired image area or composition.

Rotating the frame

Each time you press the <B> button, the trimming frame will toggle between the vertical and horizontal orientations. This enables you to create a vertical-oriented print from a horizontal image.

Adjusting the rotation angle

By turning the <5> dial, you can adjust the angle of the image rotation by ±10 degrees in 0.5-degree increments. After rotation,

< > will change to blue.

3 Press <0> to exit the trimming.

XThe print setting screen will reappear.

You can check the trimmed image area on the upper left of the print setting screen.

141