Canon 1901B004, 1901B014 3 Manual Sensor CleaningN, CLEA n, Select [OK], Clean manually, Sensor cleaning, 4End the cleaning, Select [Clean manually], Select [Sensor cleaning]

3 Manual Sensor CleaningN

Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.

The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended.

Before cleaning the sensor, detach the lens from the camera.

1

2

3

Select [Sensor cleaning].

Under the [6] tab, select [Sensor cleaning], then press <0>.

Select [Clean manually].

Turn the <5> dial to select [Clean manually], then press <0>.

Select [OK].

Turn the <5> dial to select [OK], then press <0>.

XIn a moment, the mirror will lockup and the shutter will open.

“CLEA n” will blink on the LCD panel.

4End the cleaning.

Set the power switch to <2>.

For the power source, using the AC Adapter Kit ACK-E2 (sold separately) is recommended.

If you use a battery, make sure it is fully recharged. If a battery grip with size-AA batteries is attached, manual sensor cleaning will not be possible.

131