Canon 1901B004, 1901B014 4 Set the printing effects

wPrinting

4 Set the printing effects.

Set as necessary.

	Turn the <5> dial to select the item
	on the upper right, then press <0>.
	If the <e> icon is displayed next to
	<z>, the printing effects can also
	be adjusted. (p.140)
	Next, turn the <5> dial to select the
	desired printing effect, then press
	<0>.
Item	Description
EOff	Same as the printing characteristics turned “On”. No automatic
	correction will be performed.
EOn	The image will be printed according to the printer’s standard
	colors. The image’s Exif data is used to make automatic
	corrections.
EVivid	The image will be printed with higher saturation to produce
	more vivid blues and greens.
ENR	The image noise is reduced before printing.
0 B/W	Prints in black-and-white with true blacks.
0 Cool tone	Prints in black-and-white with cool, bluish blacks.
0 Warm tone	Prints in black-and-white with warm, yellowish blacks.
zNatural	Prints the image in the actual colors and contrast. No automatic
	color adjustments will be applied.
zNatural M	The printing characteristics are the same as the “Natural”
	setting. However, this setting enables finer printing adjustments
	than with “Natural.”
EDefault	The printing will differ depending on the printer. For details, see
	the printer’s instruction manual.

*The screen display may differ depending on the printer.

*When the printing effects are changed, the changes will be reflected on the screen. However, the actual result of the printing effects might look different from what you see on screen. The screen only shows an approximate rendition. This also applies to [Brightness] and [Adjust levels] on page 140.

138