E

Using a Memory Card

7.Select MIX LEVEL.

8.Adjust the mix level.

9.Close the menu.

• CARD MIX flashes in the display.

On/Off

10.Press the card MIX button.

•CARD MIX stops flashing.

•Your currently recording image is combined with the pre-recorded animation.

•Each time you press the card MIX button, your selection is activated (display lights continuously) or deactivated (display flashes).

Recording the Combined Image onto a Tape

For movies

1.Press the start/stop button to start and stop recording.

• The combined images are recorded onto the tape.

For still images

1.Press the PHOTO button halfway down and hold it.

•F flashes white in the display as the camcorder adjusts the focus and it is displayed continuously as a green mark when the camcorder is ready to take the image.

2.Press the PHOTO button fully down to record the image to the tape.

•F disappears from the display.

•The combined images are recorded onto the tape for approximately 6 seconds.

Note:

•If you change the position of the POWER switch or TAPE/CARD switch, select your still image for Card Mix again.

146