Using the LCD Screen

Opening and Closing the LCD Screen

E

Press the LCD panel OPEN button and open the panel by pulling it away from the camcorder. This automatically switches the LCD screen on and the viewfinder off. Close the LCD panel until it clicks securely closed. When you close the LCD panel, the LCD screen automatically switches off and the viewfinder switches back on.

Changing the Angle of the LCD Screen

You can choose the angle of the screen that suits you best by opening and rotating the screen. You can also rotate the LCD screen so that it faces in the direction of the lens ( 29).

You can also push the panel flat against the camcorder until it is flush with the side, with the screen facing outwards.

Notes:

•Avoid touching the LCD screen when moving the LCD panel.

•Do not hold the camcorder by the LCD panel or the viewfinder.

•Make sure to open the LCD panel at 90° before attempting to rotate it.

•Always rotate the LCD panel vertically into place before closing it or pushing it flat against the side of the camcorder.

•Always fully close the LCD panel until it clicks securely.

•Be careful not to leave the LCD, viewfinder or lens exposed to direct sunlight outdoors or through a window. Doing so could cause damage.

Mastering Basics the

27