Searching the Tape (Photo Search/Date Search)
E
This allows you to move quickly through still pictures recorded anywhere on a tape (photo search) or between different days or areas of recording (date search) on a tape.
1.Press the SEARCH SELECT button to choose between photo/date search.
•PHOTO SEARCH or DATE SEARCH appears in the display for 4 seconds.
2.Press the - and + buttons to move backwards or forwards through the still images or between different days of recording.
•Press once to move to the start of the previous/next still image or day on the tape.
•You can press more than once to move to the corresponding still image or day (up to a maximum of 10 times), e.g. press the + button 5 times to move forward 5 still images or days.
•PHOTO SEARCH/DATE SEARCH appears in the middle of the display alongside the - or + mark and number to search through. You can change direction easily by pressing the button for the opposite direction.
Notes:
•Press 3 (stop) to stop searching.
•If you begin a search very close to the start of a recorded still image during photo search, the camcorder may skip straight past it.
•When you have set the time zone, date search also looks for the change in date based on the adjusted time.
•A date/time zone cannot be identified if the total recording time on that day/time zone was less than 1 minute.
•Date search playback may start just before or after the beginning of the located section.
•If the data code is not displayed correctly you will not be able to operate the date search correctly.
Full the Using Features of Range
89