
Using the Built-in Flash
E
PHOTO
/ /
Using the Full Range of Features
58
You can take
A (Auto): The flash automatically fires according to the brightness of the subject.
(Flash on): The flash is forced to fire regardless of the brightness of the subject.
(Flash off): The flash does not fire. Use this setting when you are shooting in places where flash photography is prohibited.
Changing The Setting of the Flash
TAPE + CAMERA , CARD + CAMERA
1.Press the (flash) button.
•The display changes in the following order with each press of the button.
A (Auto)
(Flash off)
(Flash on)
•The selected mode appears in the display, with the exception of A (Auto), which disappears after 4 seconds.
•When you press the flash button while Auto is selected and A is not displayed,
A appears. Then, when you press the button while it is displayed, you can change the setting.
During record pause mode
2.Press the PHOTO button halfway down and hold it.
•The flash automatically rises.
• appears green in the display.
3.Press the PHOTO button fully down to take the still picture.
•The flash fires.
•During recording, the display shows the still image.