E

Editing

Digitally outputting analog video and audio signals (Analog-Digital Converter)

Connecting the camcorder to your VCR or 8 mm video camera allows conversion of recorded analog video and audio signals to digital signals in an instant. The digital signals can be output to the other equipment with a DV terminal. The camcorder’s DV terminal works exclusively as an output terminal.

•There may be cases where analog-digital conversion cannot be done properly, depending on the signals output from the connected equipment. For example: Signals that include the copyright protective signal, or anomalous signals such as ones that include ghost signals, etc.

•You cannot use your headphones during digital conversion. Even if the AV/headphone terminal is set to “PHONES” through the menu, it will automatically be set to “AV”, and “PHONES” will disappear from the display.

•You are recommended to use power from a household power socket with the power adapter.

•Do not operate with a cassette inserted to the camcorder.

•Turn off the power of all equipment before performing connections.

•Refer also to the instruction manuals of the other equipment connected.

: Signal flow

OUTPUT

 

 

S-150 S-video Cable

S(S1)-VIDEO

 

 

 

VIDEO

 

 

 

AUDIO

AV IN/OUT

MIC

STV-250N Stereo Video Cable

L

 

 

 

 

R

OUT

 

 

 

Side with arrow

 

 

Above illustration shows the connection using a S-video cable. You can also connect to the VIDEO terminal instead ( 38).

96