Turning on the Power Switch
1
2
Set the power switch to <K>.
XThe flash recycling starts.
Check that the flash is ready.
When the pilot lamp lights in red, the flash is ready to fire (fully charged). To fire a test flash, press the <J> button.
About Auto Power Off
To save battery power, the power will turn off automatically after a certain period (approx. 1.5 min. to 15 min.) of idle use. To turn on the Speedlite again, press the camera’s shutter button halfway. Or press the Speedlite’s <J> button.
A test firing cannot be fired while the camera’s operation timer 4or 0 is active.
The Speedlite’s settings will be retained in memory even after the power is turned off. To retain the Speedlite’s settings after you replace the batteries, turn off the power and replace the batteries within 1 minute.
10