1

Getting Started and

Basic Operation

Installing the Batteries ............................................

8

Attaching and Detaching the Flash.........................

9

Turning on the Power Switch................................

10

Fully Automatic Flash Shooting.............................

11

Using E-TTL II and E-TTL Autoflash in the

 

Shooting Modes....................................................

12

Cautions for firing continuous flashes

To avoid overheating and degrading the flash head, do not fire more than 20 continuous flashes. After 20 continuous flashes, allow a rest time of at least 10 min.

If you fire more than 20 continuous flashes and then fire more flashes in short intervals, the inner overheating prevention function may be activated to make the recycling time about 8 to 20 sec. If this occurs, allow a rest time of about 15 min. and the flash will then return to normal.

7