7: FE Lock

FE (flash exposure) lock locks the correct flash exposure setting for any part of the scene.

With <a> displayed on the LCD panel, you press the camera’s <7> button. If the camera does not have the <7> button, press the <P> button.

1Focus the subject.

2 Press the <7> button. (3)

Aim the subject at the center of the viewfinder and press the <7> button.

X The Speedlite fires a preflash, then the required flash output is retained in memory.

XFEL” will be displayed in the viewfinder for 0.5 sec.

Each time you press the <7> button, a preflash will be fired and a new flash exposure reading will be locked.

If the subject is too far away and underexposure will result, the <Q> icon will blink in the viewfinder. Move closer to the subject and try the FE lock again.

If <a> is not displayed on the LCD panel, FE lock cannot be set. If the target subject is too small in the viewfinder, the FE lock might not be very effective.

15