Installing the Batteries

Install four size-AA batteries.

1

2

Open the cover.

Slide the battery compartment cover as shown by the arrow and open it.

Install the batteries.

Make sure the + and – battery contacts are correctly oriented as shown in the battery compartment.

3 Close the cover.

Close the battery compartment cover and slide it as shown by the arrow.

Recycling Time and Flash ount

Recycling Time (Approx.)

Flash Count (Approx.)

0.1 - 3.0 sec.

200 - 1400

Based on new size-AA alkaline batteries and Canon’s testing standards.

Using size-AA batteries other than the alkaline type may cause improper battery contact due to the irregular shape of the battery contacts.

If you change the batteries after firing many flashes continuously, be aware that the batteries might be hot.

Use a new set of four batteries of the same brand. When replacing the batteries, replace all four at one time.

Size-AA Ni-MH or lithium batteries can also be used.

8