Canon 2812B015 Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)

1-34
Setting the Image Buffer, Motion Detection, Audio
Playback and Interval Timer (Event)
Image Buffer
(1) [Frame Rate]
Set the frame rate that applies when image is temporarily saved in the image buffer when an
event occurs.
(2) [Pre-event Buffer (number of image frames)]
Set the number of images to be buffered before the event.
(3) [Post-event Buffer (number of image frames)]
Set the number of images to be buffered after the event.
You can set the following items.
zImage Buffer
Set the items associated with the temporary saving of image in the image buffer.
zMotion Detection
Set the operation to be performed at the time of motion detection.
zExternal Device Input
Set the operation to be performed when an event is input from an external device.
zInterval Timer
Set the timer period for e-mail notification or upload.
zSound Clip Upload
Set the audio file to be registered as a sound playback.
Note
zThe maximum image buffer size is approx. 4 MB. If a large image size is set, the Frame
Rate, Pre-event Buffer and Post-event Buffer may not be achieved as specified ( P. 1-24).
zIf buffering cannot be achieved as specified, an event log message appears. Before using
a large image size, confirm that no messages appear in the event log ( P. 1-24).